πŸ“ž +91-7667918914 | βœ‰οΈ ijireeice@gmail.com
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering A monthly Peer-reviewed & Refereed journal
ISSN Online 2321-2004ISSN Print 2321-5526Since 2013
IJIREEICE meets the suggestive parameters outlined in the latest University Grants Commission (UGC) for peer-reviewed journals, ensuring high standards of research integrity, publication ethics, and academic excellence.
← Back to VOLUME 4, ISSUE 4, APRIL 2016

Design of Single, Dual and Tri Band Notched Ultra-wideband Antenna Using Metallic Strips

Geetanjli Kalamb, Prof. A.G.Gaikwad

πŸ‘ 1 viewπŸ“₯ 0 downloads
Share: 𝕏 f in ✈ βœ‰
Abstract: This paper presents design of single, dual and tri band notched ultra wideband antenna using metallic strips. This is a compact, low power ultra wide band (UWB) antenna which mitigates the saturation of spectrum. Its low power characteristic make it invisible for the radio systems sharing the same spectrum hence minimizes interference due to other licensed bands. This proposed band notched UWB antenna is used for several frequency bands such as Wi- Max(3.3 GHz to 3.6 GHz), WLAN (5.15 GHz to 5.35 GHz and 5.725 GHz to 5.825 GHz) and HIPERLAN/ 2( 5.15 to 5.35 GHz and 5.47GHz to 5.725 GHz).

Keywords: Ultra-wideband antenna, VSWR, Partial ground plane, rectangular metallic strip, U-slot rectangular patch antenna.

How to Cite:

[1] Geetanjli Kalamb, Prof. A.G.Gaikwad, β€œDesign of Single, Dual and Tri Band Notched Ultra-wideband Antenna Using Metallic Strips,” International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), DOI: 10.17148/IJIREEICE.2016.4438

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License.