← Back to VOLUME 10, ISSUE 4, APRIL 2022
This work is licensed under a Creative Commons Attribution 4.0 International License.
DESIGN AND FABRICATION OF PNEUMATIC LIFTING TABLE OPERATED BY HYDRUALIC JACK
π 1 viewπ₯ 0 downloads
Abstract: This project was created to allow people to lift any weight with the use of air pressure. A tank is used to hold high-pressure air. A zig-zag pattern connects a cylinder with piston arrangement. The air tank and the cylinder are linked by two pipelines with ball valves. The air rushes out of the cylinder when one of the valves is opened. As a result, the piston travels in a single direction. The piston-connected rod pulls the zig-zag frame up, causing the lift to rise. The air inside the cylinder is released when the other ball valve is opened. As a result, the lift descends.
How to Cite:
[1] SHELKE SAURAV VIKAS, YADAV ABHISHEK ANANDA, WAYKAR RAHUL ASHOK, KAMTHE SUPRIYA SUNIL, PROF. P.V JATTI, βDESIGN AND FABRICATION OF PNEUMATIC LIFTING TABLE OPERATED BY HYDRUALIC JACK,β International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), DOI: 10.17148/IJIREEICE.2022.10488
This work is licensed under a Creative Commons Attribution 4.0 International License.