πŸ“ž +91-7667918914 | βœ‰οΈ ijireeice@gmail.com
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering A monthly Peer-reviewed & Refereed journal
ISSN Online 2321-2004ISSN Print 2321-5526Since 2013
IJIREEICE meets the suggestive parameters outlined in the latest University Grants Commission (UGC) for peer-reviewed journals, ensuring high standards of research integrity, publication ethics, and academic excellence.
← Back to VOLUME 10, ISSUE 4, APRIL 2022

Review And Implementation Of 4:2 Compressor Based Multiplier Using Verilog

C.M.Rohini, Dr.B.Sargunam, Dr.R.Chitra, E.Elakkiya

πŸ‘ 1 viewπŸ“₯ 0 downloads
Share: 𝕏 f in ✈ βœ‰
Abstract: The scientific literature, which suggests numerous circuits built with approximate 4-2 compressors, has a lot of interest in approximation multipliers. The designer who desires to employ an approximation 4-2 compressor faces the difficulty of selecting the suitable topology due to the enormous variety of available alternatives. This paper compares approximate 4-2 compressors already proposed in the literature in this work. We also introduce a fresh approximate compressor, bringing the total number of approximate 4-2 compressors studied to twelve. The circuits under investigation are used to create 8x8 and 16x16 multipliers in 28nm CMOS technology.

Keywords: Multiplier, 4:2 Compressor, Half adder, full Adder.

How to Cite:

[1] C.M.Rohini, Dr.B.Sargunam, Dr.R.Chitra, E.Elakkiya, β€œReview And Implementation Of 4:2 Compressor Based Multiplier Using Verilog,” International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), DOI: 10.17148/IJIREEICE.2022.10418

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License.